Cekol Q1 Uni Universal Tile Adhesive 5 kg
Universal tile adhesive from the Cekol brand allows you to glue ceramic tiles in swimming pools, fountains, on balconies, and terraces. It can be used for gluing ceramic, stoneware, stoneware, glass, and mineral wool tiles, as well as polystyrene elements to concrete, brick, aerated concrete, expanded clay blocks, gypsum boards and blocks, plasterboards, and stable wood-based substrates.
Tile adhesive is a deformable, cement-based adhesive mortar with improved technical parameters, reduced runoff, and extended open time. The product is recommended for heated surfaces.
Product advantages and features
- It is characterized by increased adhesion.
- Thanks to its precisely selected formula, it is highly resistant to flow.
- Universal - for gluing ceramic tiles in swimming pools, fountains, on balconies and terraces.
- It can be used for gluing ceramic, stoneware, stone, glass and mineral wool tiles, polystyrene elements to concrete, brick, aerated concrete, expanded clay blocks, gypsum boards and blocks, plasterboards and stable wood-based substrates.
Substrate preparation
The substrate should be clean, compact and free from grease, any residues of emulsion and oil paints. and loose sand grains should be removed with a spatula or rough brush.
Execution
Execution of the waterproofing layer. To achieve tightness, use the CEKOL ZU-1 single-component sealing mortar or the CEKOL ZU-2 two-component sealing mortar. Preparation of the mortar. Prepare the mortar by pouring 1 kg of powder into 0.23 - 0.25 l of water (4.6 - 5 l of water per 20 kg bag), then mix thoroughly with a low-speed mixer until uniform. Wait approximately 3 minutes and mix thoroughly again. Mortar use-by time: approximately 3 hours.
Application of the adhesive. Apply the adhesive to the prepared substrate using a notched trowel. In the case of heated surfaces, turn off the heating before laying the tiles. It can be turned on at least 7 days after laying the tiles. When gluing highly absorbent tiles and stoneware tiles outdoors, CEKOL Q-4 PLUS should be applied in a continuous layer both to the substrate and to the underside of the tiles, which will significantly increase adhesion. In places exposed to water leakage, apply a waterproofing layer.
Storage
Store in dry rooms, in original packaging.
Parameters:
- Brand: Cekol
- Capacity: 5 kg
- Application: Notched trowel
- Adhesive class: C2TES1
- Joint strength expressed as: Initial adhesion ≥ 1 N/mm²
- Joint durability under conditioning/thermal aging conditions expressed as: Adhesion after thermal aging ≥ 1 N/mm²
- Joint durability under operating conditions water/humidity expressed as: adhesion after immersion in water ≥ 1 N/mm²
- Joint durability under freeze-thaw cycles expressed as: adhesion after freeze-thaw cycles ≥ 1 N/mm²
- Mixing ratio: 0.23 to 0.25 l of water per 1 kg of dry powder
- Tile correction time: 10 minutes
- Coverage: approximately 2.7 kg/m² using a 10 mm notched trowel
- Layer thickness: Up to 20 mm
- Application and substrate temperature: + 5°C to + 25°C
- Suitable for foot traffic and grouting: Approx. 24 hours at 18°C
- Reaction to fire: A1/A1fl
- The product has: Hygiene certificate
- Application: Tile adhesive
- Price is for one piece
Brand: Cekol
Application: Tile adhesive
Thickness: Up to 20 mm
No-delivery refund
