433Mhz DC 12V 1CH Universal Wireless Remote Control Switch with Transmitters, EV1527 Learning Code RF Relay Receiver Module

Product Name: EV1527 Learning Code RF Relay Receiver Module Module Type: Remote Control Switch Operating Frequency: 433MHz Output Current: Max 10A Working Current: Less than 10mA Receiving Sensitivity: Greater than 95dBm Working Voltage: DC 12V

Features:

- The operating mode of the product is adjustable. Extremely easy to set up and reset. There are 4 operating modes can be chosen: Momentary, toggle, latched, delay mode. You can easily set up by yourself depends on your needs. This item has already been set up in latched mode.- 433Mhz RF wireless remote control switch, radio frequency signal transmission, stable and reliable performance, low power consumption, high reception sensitivity (>95dBm), strong anti interference ability, long transmission distance, and strong penetration ability. It can pass through walls, floors, doors, board and so on. It can be controlled within 100 meters distance in open area. You can remotely operate each machine connected to the relay receiver through the remote control. - Premium relays that can be used more than 100000 times make the product more durable and stable. The high-power terminal can withstand a current of 15A, so even if the current is unstable, this product can still perform well. - One receiver can store about 20 transmitters. So you can share the transmitters to family / friends. All of you can remote control the device connect with the relay receiver. And one transmitter can control multiple receivers too. - This receiver adopts 10A relay, which can load high-power electrical appliances to ensure long-term stability control. There are 3 terminals for the wireless relay: Normally open, common, normally closed. The voltage of this receiver is 12V. The operation is very safe. The terminal is a screw buckle, convenient and safe. Input / Output Voltage: 1 - 250V Operating Temperature: -40 - +80 Degrees Celsius Working Mode: Momentary, Toggle, Latched, Delay Mode Reception Range: Greater than 100m (Open Area) Support remote control type: 1527 Learning Code, 2262 Fixed Code Wiring Instructions: - +: Connected to the positive pole of a 12V power supply. - -: Connected to the negative pole of the 12V power supply. - NO: Output terminal; The normally open port of the relay. - COM: Output terminal; Relay common terminal (Can be connected to 1v – 250V). - NC: Output end; The normally closed end of the relay. Operating Mode Description: - Momentary Mode: Press and hold on the remote control button relay will turn on; Release this button, relay will turn off. - Toggle Mode: Press on button, relay will turn on; Press this button again, relay will turn off. - Latched Mode: Press button "A", relay will turn on; Press button "B", relay will turn off. - Delay mode: Press the button relay will turn on, release the button and start timing. After 5s / 10s / 15s / 20s (4rd gear), the relay will automatically turn off.

Learning Method: - Momentary Mode Learning Method: Press the control board code matching button once, and the LED indicator light will flash once. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash three consecutive times to successfully match the code. - Toggle Mode Learning Method: Press the control board code matching button twice continuously, and the LED indicator light will flash twice. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash three times continuously to successfully match the code. - Latched Mode Learning Method: Press the control board code matching button 3 times continuously, and the LED indicator light will flash 3 times. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash 3 times continuously to successfully match the code. The first learned key value serves as the "on" function, and the second learned key value serves as the "off" function. - 5 Second Delay Learning Method: Press the control board code matching button 4 times continuously, and the LED indicator light will flash 4 times. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash 3 times continuously to successfully match the code. - 10 Second Delay Learning Method: Press the control board code matching button 5 times continuously, and the LED indicator light will flash 5 times. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash 3 times continuously to successfully match the code. - 15 Second Delay Learning Method: Press the control board code matching button 6 times continuously, and the LED indicator light will flash 6 times. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash 3 times continuously to successfully match the code. - 20 Second Delay Learning Method: Press the control board code matching button 7 times continuously, and the LED indicator light will flash 7 times. After the LED indicator light is on, press the remote control button that needs to match the code, and the control board LED indicator light will flash 3 times continuously to successfully match the code. - Data Clearing Method: Power on and then clear the code. Press the learning button on the control board for 8 consecutive times to automatically clear all remote controls that have learned the correct code. After clearing, the remote control that was previously learned to code will no longer be controlled. - Button Clearing Method: Power on and then clear the code. Press and hold the learning button on the control board for 6 seconds, wait for the LED light to flash 5 times, and then turn off, automatically clearing all remote controls that have learned the correct code. After clearing, the remote control that was previously learned to code will no longer be controlled. Place of Application: - Electric door locks, alarm bells, garage door control, lighting control, ventilation equipment, remote curtains, access control systems, and various motor control systems, etc. Note: - Relay suction, LED light on; Relay disconnected, LED light off. - This controller can learn 20 remote controls with different codes and any button. If it exceeds the limit, the earliest learned remote control will be cleared in sequence.

Package Including: 1 x RF Relay Receiver 1 x Remote Control Product Weight: 30 G / 1.06 Ounces Product Dimensions (L*W*H): 42*38*26 MM / 1.65*1.50*1.02 Inches Package Weight: 32.0 G / 1.13 Ounces Package Dimensions (L*W*H): 44*40*28 MM / 1.73*1.57*1.10 Inches Retail Packaging: Yes, Colored Box