Sanwa Supply Display Switch (for Mini D-sub (HD) 15-pin), Dual Circuit, SW-EV2N

・You can switch between two computer display signals/Mini D-sub (HD) 15-pin and display them on a single monitor or projector. ・This switch uses an electronic switch system that minimizes signal loss within the switch. ・Supports high resolutions of 1920 x 1440 dots (up to 85Hz refresh rate). ・This switch's operation LED also turns off when the computer is turned off. *The LED only lights up when a display video signal is being received. The LED will not light up simply by connecting the AC adapter. *Depending on the computer, the LED may not turn off due to constant current flow even when the power is off. *It is not possible to switch between two displays using a single computer. *A connection cable is not included with this product. Please use a separate connection cable.

Supported Resolutions: Up to 1920 x 1440 pixels (up to 85Hz refresh rate) @ 250MHz Interfaces: Input: Mini D-sub (HD) 15-pin female x 2 Output: Mini D-sub (HD) 15-pin female x 1 Switching Ratio: 2:1 *The reverse is not possible. ・Environmental Requirements: Operating Temperature/Humidity: 5-40°C, 80% or less (non-condensing)

Storage Temperature/Humidity: 0-80°C, 80% or less (non-condensing) ・Material: Steel ・Dimensions: W128 x D75 x H45mm ・Weight: 430g ・Accessories: AC adapter (DC9V/1A), instruction manual, warranty card [Compatible Displays]: Displays or projectors with a Mini D-sub (HD) 15-pin female connector [Compatible Resolutions]: Up to 1920 x 1440 pixels (refresh rate 0.5 Hz) [Switching Option]: 2 PCs: 1 Display *The reverse is not possible. [Interfaces]: Input: 2 x Mini D-sub (HD) 15-pin female connectors, Output: 1 x Mini D-sub (HD) 15-pin female connector [Operating Temperature/Humidity]: 5-40°C, 80% or less (non-condensing)