[Please refer to the instruction manual.]
[General Name]
Skin Infrared Thermometer
[Product Name]
Tanita Non-Contact Thermometer BT-54X
[Contraindications/Prohibitions]
Do not use by children alone [due to risk of accidental ingestion or injury]
[Product Specifications, etc.]
Temperature Sensing Element: Infrared Sensor
Display Temperature Method: Actual Temperature Method/Corrected Temperature Method
Temperature Display: 3-digit display, minimum temperature display 0.1°C
Temperature Measurement Range: (Body Temperature Measurement Mode) 34.0°C~43.0°C, (Temperature Measurement Mode) 0.1°C~99.9°C
Maximum Permissible Error: (Body Temperature Measurement Mode)
36.0°C~39.0°C: ±0.2°C, Outside 36.0°C~39.0°C: ±0.3°C
Past Me Molly: 30 doses
Applied part classification: BF type applied part
Type of protection against electric shock: Internally powered device
Power supply: 2 x AAA alkaline batteries (LR03)
Battery life: Approximately 5,000 times (when manually powered off)
Operating environment: (Temperature range) 10°C to 40°C, (Humidity range) 95% RH or less (non-condensing)
Storage environment: (Temperature range) -20°C to 50°C, (Humidity range) 95% RH or less (non-condensing)
[Precautions for Use]
Important Basic Precautions
(1) Do not disassemble, repair, or modify the main unit.
(2) Do not drop or subject to strong impacts.
(3) Do not directly touch the measurement sensor with your fingers.
(4) Do not allow the measurement sensor to come into contact with the object being measured.
(5) Before measuring body temperature, ensure the patient remains in a room temperature environment for at least 30 minutes.
(6) Use this product according to its intended purpose.
(7) Measure your normal body temperature beforehand to determine if you have a fever.
(8) Compare measurement results from the same area. Measurements from the forehead and underarms may differ because they are taken at different sites.
(9) In all cases, treat body temperature measurement results as reference only. Always consult a doctor and follow their instructions.
Other Basic Precautions
(1) Allow the device to acclimate to the ambient temperature for about 30 minutes before measurement.
(2) Do not use on any part of the body other than the forehead when measuring body temperature.
(3) Measure body temperature while the patient is at rest.
(4) Generally, body temperature is lower during sleep; do not directly compare it with body temperature while awake.
(5) Do not measure body temperature within 30 minutes after going out, exercising, or bathing.
(6) It is recommended to take multiple measurements. If the measurements differ, use the highest temperature as the result.
[Storage Instructions and Shelf Life]
1. Storage Environment
(1) Temperature: -20 to 50°C
(2) Relative Humidity: 95% or less (no condensation)
2. Storage Method
(1) Do not place in extremely high or low temperatures, high humidity, or in direct sunlight.
(2) Remove batteries from the unit before storing if not using for an extended period. 3. Service Life
3 years (Self-certified based on our company data)
[Name of Manufacturer and Distributor]
Manufacturer/Distributor: Tanita Akita Corporation
Address: 28-1 Shimoda Mogizoe, Horiminai, Daisen City, Akita Prefecture
Phone Number: 0187-66-2122
Distributor: Tanita Corporation
Inquiries: Customer Service Consultation Office
Address: 1-14-2 Maeno-cho, Itabashi-ku, Tokyo
Phone Number: 0120-133821 : 0570-783551 (for mobile phones)
Manufacturer: AVITA Corporation (Taiwan)
[Intended Use or Effect]
This product measures and displays the temperature of the skin on the body surface.
Measurement in approximately 1 second: Simply point it at the forehead to take a measurement, allowing you to measure your temperature without waking the person sleeping.
Large backlit display: Equipped with a large display that makes it easy to check results even in dimly lit rooms.
Audible and light alert for temperatures above 38°C: Up to 30 past measurement results can be stored.
Medical device classification: Certified as a specified controlled medical device.
Non-contact measurement method: Uses an infrared sensor to measure body temperature without touching the skin.