Multifunctional Incubator Accessories Automatic Egg Turning Intelligent Thermostat For Household Water Bed Hatching AC110-220V

Output Power : ＜18.65 Use : others High-concerned chemical : none Communication method : Other Camera Equipped : No Model Number : W9005 Compatibility : others Brand Name : occkic Origin : Mainland China State of Assembly : Ready-to-Go Certification : NONE

Product selling points: 1. Use high-quality materials with guaranteed quality 2. Four screen display: incubation countdown, incubation days, temperature, humidity all displayed on the screen 3. Custom selection mode, incubating diverse choices 4. Egg taking function, easy to select eggs, one machine can handle everything 5. It should be widely used in civil and industrial fields

Instructions for Use: Detect egg flipping function Press the plus button once to observe if the egg tray flips. The factory set automatic egg flipping test is once every 90 minutes. Connect the testing circuit, turn on the power, add 50-1002mL of water to the minimum compartment, and test the machine for 2 hours. Press the "+" button on the control panel to check if the egg flipping button is normal. The temperature is around 37.8 and the humidity is around 60%, which is normal. If the humidity is less than 60%, add 50-100mL of water to incubate (note: if the humidity is too high, do not adjust, wait until the humidity is below 55% before adding a small amount of water) Egg selection Fertilized eggs that are 4-7 days old, free of feces, cracks, and contamination from broken egg liquid, preheated to 15-30 degrees Celsius for 24 hours, and placed in the incubator after machine testing. incubator Eggs take 21 days, duck eggs take 28 days, goose eggs take 30 days, pigeon eggs take 18 days, quail eggs take 18 days, and peacock eggs take 28 days. The hatching period is different, and all hatching eggs are divided into two stages: the early stage and the late stage. The late stage refers to the last 3 days of the hatching period, and the number of days in the early stage varies depending on the hatching period. Please take out the hatching net in the early stage and place it in the hatching net after the egg tray is taken out in the last three days. Taking eggs as an example, the usage instructions will be explained. When incubating eggs, the temperature does not need to be adjusted throughout the entire incubation period. The temperature should be maintained at 37.8 degrees Celsius, and 1-2 pots of water should be added daily. The humidity should be around 60% in the early stages of incubation and around 75% in the late stages. egg candling For those without experience, they cannot be seen before hatching. They should be incubated in a machine for 7 days, leaving behind obvious blood streaks. Select the undeveloped ones that are transparent or without blood streaks. water injection There are two water injection holes on the side of the machine. Use a kettle to add 50-100mL of water to the smallest compartment of the sink. If the humidity is not enough, add other compartments according to the humidity. Depending on the air humidity in each region and the size of the machine, the amount of water added may vary slightly. If the humidity is below 50%, add an appropriate amount of water. Occasionally increasing or decreasing the humidity will not affect hatching, and it cannot be kept high or low all the time. Spray or cold egg After hatching for 18 days (taking eggs as an example), use the provided water sprayer and add 40 degree warm water to spray a few times on top of the eggs. The sprayed mist will naturally fall on the eggs, once in the morning and once in the afternoon. After spraying, you can open the machine cover to cool the eggs for about 5-10 minutes, and then close the machine cover. If the eggs are not hot, there is no need to cool them. landing In the last three days, pick up the eggs from the egg tray and place them on the hatching net. You don't need to flip the eggs anymore, but the humidity in these days should reach about 75% to prevent the eggshells from being too hard and not breaking. After breaking the shells, pick up the egg skins and take them out of the incubator when the feathers are dry. Find a paper box and put a light bulb in it to slowly warm them up and raise them This process takes 7-10 days and the temperature is around 30 degrees Celsius.

The package includes: Incubator accessories * 1

label:yes