3-function garden meter - OVAL WHITE LINE
A device that allows you to measure both soil acidity and moisture, as well as and sunlight intensity.
Very useful for growing many varieties of plants and vegetables.
Allows you to measure pH on a scale of 3 to 10.
1. Set the slider to the moisture measurement position (MOIST).
2. Place the metal tip of the moisture meter in the ground, 3/4 of its height (this should be done very gently so as not to damage the meter or the plant's roots).
3. Moisture is measured using the probes located on the metal tips.
4. After a while, read the value on the device's scale and compare the readings to the recommended soil moisture level for a given plant.
Measuring soil acidity (pH):
1. Set the slider to the acidity (pH) measurement position.
2. Prepare a single sample of the soil, preferably taken in several places (300-400g), removing any pebbles, blades of grass, roots, leaves, etc.
3. Pour the soil into a 0.5l jar, add water to make the soil muddy.
4. Carefully wipe the tip of the meter with rough paper or a brush and insert the probe into the prepared substrate.
5. Take the reading after 60 seconds on the device's scale.
1. Set the slider to the sunlight measurement position (LIGHT).
2. Sunlight values:
- low [0-500]
- neutral [500-1000]
- high [1000-2000]
1. It is recommended to thoroughly wipe the meter sensor with a cloth or paper towel immediately after the measurement.
2. The device is only used to measure soil moisture and pH.
3. Do not place the device directly in water or chemical solutions.
4. Plants should only be watered when the meter readings are lower than recommended. When regulating the soil pH, any fertilizers should be used in relation to the measurement results.
A device that allows you to measure both soil acidity and moisture, as well as sunlight intensity. Very useful when growing many varieties of plants and vegetables. It allows you to measure pH on a scale of 3 to 10.
Soil moisture measurement
Soil acidity measurement (pH)
1. Set the slider to the sunlight measurement position (LIGHT).
2. Sunlight values:
- low [0-500]
- neutral [500-1000]
- high [1000-2000]
soil acidity measurement |
1. Set the slider to the acidity measurement (pH) position.
2. Prepare a one-time sample of the substrate, preferably taken in several places (300 -400g), removing any stones, blades of grass, roots, leaves, etc.
3. Then pour the soil into a 0.5l jar, add water to make the soil muddy.
4. Carefully wipe the tip of the meter with rough paper or a brush and insert the probe into the prepared surface.
5. Take a reading after 60 seconds on the device's scale.
soil moisture measurement |
1. Set the slider to the moisture measurement position (MOIST).
2. Place the metal tip of the moisture meter in the ground, 3/4 of its height (do this very gently so as not to damage the meter or the plant's roots).
3. Moisture is measured using probes located on the metal tips.
4. After a while, read the value on the device's scale and compare the readings to the recommended soil moisture level for a given plant.
manufacturer's designation | WL-M12
No-delivery refund
