Single Furniture Glide, Diameter 15.7, Furniture Foot, Driven In, BLACK, 50 PCS

Single furniture glider fi15.7 furniture foot, hammered in, BLACK 50 PCS

The auction applies to 50 pieces

On another auction, the glider is offered for 100 and 10 pieces

1️⃣ The most important information

• material: plastic + steel nail

• makes it easier to move furniture

• protects the floor against scratches

• assembly: hammered in

• foot color: black

• nail length: 15 mm

• total height: 20 mm

• foot height: 5 mm

3️⃣ APPLICATIONS AND FUNCTIONS

✅ application : chairs, cabinets, chests of drawers, bathroom furniture

✅ function :

• floor protection, noise dampening, furniture stabilization

• expansion joint between furniture and floor

• protecting the bottom of furniture against moisture

Thanks to the driven-in nail, the installation is quick and durable - the foot can be attached in a few seconds. The foot with a height of 5 mm raises the furniture minimally, without negatively affecting its aesthetics or functionality.

1. Prepare the furniture

Turn the furniture over or lay it down so that you have easy access to the legs. Make sure the surface is stable.

2. Mark the mounting location

Mark the center of the furniture leg – the glide should be centered to ensure even support.

3. Pre-punching (if needed)

For harder wood, you can lightly prick the mounting location with a center punch or thin nail.

4. Place the glider against the leg

Position it perpendicular to the wood surface – this will ensure proper seating and stability.

5. Drive the glider in

Lightly tap the foot with a hammer, holding the glider from above with your fingers. Drive in slowly and evenly until the plastic foot reaches the leg surface.

6. Check for stability

Once seated, make sure the glider is seated evenly and securely. The furniture should stand stably without wobbling.