LED Circular Fluorescent Lamp, 32W Equivalent, Daylight White 5500K, No Installation Required for Glow-Type Lighting Bases (Remove Glow Starter), G10

[Circular Fluorescent Lamp, 32W Equivalent] Power Consumption: 14W Voltage: AC100V 32W Equivalent 50/60Hz Dimensions: φ30*299mm Beam Angle: 170 degrees Base: G10 Color Temperature: 5500K Daylight White Material: Polycarbonate Luminous Flux: 1470LM [32W Round LED Fluorescent Lamp - No Electrical Work Required] This LED lamp has power supply on both sides. No electrical work is required for glow-type lighting bases/ballasts. For glow-type lighting bases/ballasts, simply remove the glow starter. (Rapid-start type, inverter type with glow starter, electronic lighting bases/ballasts, and inverter-type lighting bases/ballasts without glow starter cannot be used.) Direct wiring work is required for the above. [Long-Life Double-Sided Power Supply LED Lamp] Its lifespan is approximately 4 to 8 times longer than fluorescent lamps, significantly reducing the frequency of replacements! LEDs consume significantly less power, reducing electricity costs by 1/2 to 1/3! *If your lighting fixture has two lamps, please use two identical lamps. Do not mix these lamps with conventional fluorescent lamps in two-lamp fixtures. [Environmentally Friendly Round LED Fluorescent Lamp] Achieves low power consumption! Made of a shatter-resistant material for high safety. Contains almost no infrared or ultraviolet rays. Since LEDs do not contain mercury, they do not emit harmful substances and are an environmentally friendly, eco-conscious lighting fixture. [Warranty Period] The warranty period for this product is one year from the date of purchase. *1 - Not applicable to special lighting bases. For example, electronic lighting bases/ballasts, dressing tables, study desks. *2 - Please check the lighting method of your lighting base/ballast before purchasing. If you are unsure, please contact the lighting base manufacturer. *3 - Not suitable for outdoor or enclosed fixtures. High temperatures are not recommended. *4 - We believe that newer LED fluorescent lamps may not be compatible with older lighting bases. If the lighting base is old, malfunctions may occur due to ballast deterioration. In this case, we recommend a direct connection method. *5 - The secondary voltage must not exceed 230V. Allowable range: 85V-230V. Please check the rating plate of your lighting base before purchasing.