Feature:
1. Refitted for Maxton style rear roof spoiler, universal for two compartment vehicle , such as for Fit.
2. Reduce drag, improve fuel efficiency, enhance downforce, tire traction and driving stability.
3. Made of premium quality ABS material, anti‑corrosion and durable, high strength.
4. Sophisticated workmanship, significantly improve the sporty appearance for your car.
5. Supplied with double‑sided tape, easy to mount, no need of complicated modifications.
Specification:
Item Type: Rear Roof Spoiler
Material: ABS
Style: for Maxton Style
Size: Approx. 990 x 95mm/39 x 3.7in
Fitment: Universal for Two Compartment Vehicle
replacement for Seat LEON Maxton MK1 Mk2 Mk3 MK4 MK5 MK6 MK7 2000-2021
replacement for Fit
replacement for Yaris
etc.
How to Use:
1. Before installation, clean the installation area of the trunk lid with car wash liquid to remove dust and dirt, and ensure that the surface is completely dry and free of water.2. Tear off a small part of the adhesive backing, place the rear wing at the designated position. After confirming that everything is correct, you can stick a few strips of masking tape along the edge of the rear wing as positioning marks to prevent it from being stuck crooked during the formal application.3. Use a hair dryer or a hot air gun (on a low setting) to heat the red double-sided tape on the back of the tail fin. Just blow until the tape is slightly warm and soft. Do not deform the plastic.4. Remove the release paper from the double sided tape, align it with the prepared positioning mark, gently stick one end of the rear wing first, slowly lower the other end to ensure the position is accurate, then press the middle part of the rear wing firmly, and then push it towards both ends to squeeze out the air bubbles.5. After pasting, press the entire rear wing surface firmly with your palm, especially the edges and areas with larger arcs, to ensure that the tape is in full contact with the car paint.
Package List:
1 x Rear Roof Spoiler
1 x Double-Sided Tape
Note:
1. This product is not specifically designed for vehicles. There may be a risk of gaps during installation. If a high degree of fit is required, it is recommended to look for a dedicated vehicle model.2. Confirm the consistency of the arc of the installation position with the appearance structure and dimension of our products.
3. Confirm that the installation location is a flat paint surface without any protrusions or functional components affecting it.
No-delivery refund
