Wood Impregnant with Wax Silicone Pine Hydrophobic 2in1 5l D010

WOOD IMPREGNATION WITH WAX SILICONE PINE HYDROPHOBIC 2in1 5L D010

Wood impregnant with wax (siliokonem) 2-in-1 does not require the use of a primer or base coat, the first layer will simultaneously be the priming layer, which saves time and money. It is an aqueous, semi-covering (glazing) acrylic-silicone impregnation. Effective protective and decorative preparation intended for protecting wood used outdoors and indoors. Thanks to the combination of coloring pigments with the addition of silicone, the impregnate protects the wood from moisture, UV radiation, and adverse weather conditions, giving it a durable color while leaving the clear grain pattern of the natural wood visible, even after multiple coats. The water-based product ensures easy application, even coverage, and quick drying.

⭐ Key features and benefits of the product ✅ Protection and coloring in one step – the preparation creates a durable protective layer, limiting the penetration of moisture into the wood. ✅ Silicone additive – reduces surface absorbency and increases resistance to rain and moisture. ✅ Weather resistance – effectively protects wood from sun and precipitation, helping to maintain an aesthetic appearance for a long time. ✅ Natural effect – emphasizes the wood structure and gives a uniform color without the flaking effect. ✅ Safe and comfortable to work with – water-based formula with a low odor, solvent-free, safe to use without additional restrictions. ✅ Short drying time – allows for efficient completion of work. ✅ Universal application – can be applied with a brush, roller, or spray.

Application The preparation is intended for protecting external and internal wooden elements, such as: fences and railingsgazebos, pergolas, carportsgarden furnitureelements of small architecture Can be used on both raw wood and for renovating previously protected surfaces. Product available in capacities of 2.5L, 5L, 10L in the capacity section and in 36 colors in the color/pattern section. Look for the offer below the price.

Technical information Type: wood impregnant with siliconeColor: D010 Capacity: 5 LBaza: waterApplication: outdoor and indoor woodComposition: water, silicone dispersion, polymer binders, pigmentsDrying time: 2-4 hours depending on the ambient temperature and substrate. Consumption on a typical substrate is :1L = 8m2 with one coat, 1L = 5m2 with two coats, recommended number of coats:- raw wood: 2-3 layers (including the primer layer),- renovation painting: 1-2 layers. Consumption depends on the application technique and the type (absorbency) substrates.

♦️ Important information before purchasing and using the product ♦️ Dear Customers, the impregnants are prepared individually to order, therefore we ask for thoughtful purchases. Color notice: Due to differences in display technologies, individual monitor settings, and lighting conditions, the color visible on the screen may differ from the actual shade.. To be sure about the color choice, we recommend ordering samples that best represent the final effect.. We invite you to an offer where you can order 2 colors of impregnate, 2x150ml, to try the product. Not pre-ordering a sample carries the risk that the final color may not fully meet your expectations.

To avoid misunderstandings regarding color reception, please, after receiving the product,: ✅ Color test – before application, perform a test on a small area (Approx. 5 cm), to ensure the shade meets your expectations. ✅ Color assessment – the color should be assessed only after it has completely dried, as it may temporarily change during drying.

Usage Apply the impregnant to dry, clean wood – raw or previously painted. Before application, remove dirt, resin, loose fragments of old coatings, and other contaminants; the surface should be at least matted. For the best and long-lasting protection, it is recommended to completely remove old coatings so that the preparation can penetrate the wood structure. For adequate protection and color, apply 2–3 coats. The first serves as a primer (2-in-1 product), the second ensures the correct coating thickness and color intensity. The third layer is optional – for a stronger color and maximum protection. Layer spacing:min. 4 hours(20°C, humidity 60%). After approx. 1 hour, the coating achieves initial weather resistance; however, it should not be exposed to the elements during this time.

⚠️ ATTENTION!Not suitable for mechanically stressed areas (by movement, by wiping). In these places, the wood should be protected with a coating product. (e.g.. with wood stain or varnish).