Professional RGB LED strip 5 meters 300 LED SMD 5050 3-chip RGB Epistar + Remote Control + Controller Professional RGB LED strip 5 meters 300 LED SMD 5050 3-chip RGB Epistar + Remote Control + Controller High quality workmanship Quality guarantee Used for room decoration Possibility of cutting Sticked with strong tape from 3M Possibility of dimming and brightening the light 4 lighting modes Possibility of brightening and dimming Possibility of setting 12 different color variants (brightness is not included) Possibility of setting the color Control via wireless remote Low power consumption and high energy efficiency The tape is flexible - it is easy to stick to the corners Easy to install Silicone cover protects against moisture High durability of the tape Long service life of the LEDs The remote control allows control from a long distance Create a unique room decor Don't buy a pig in a poke! Below are some examples of the differences between our tapes and those of our competitors: Brightness - Our products use high-quality LEDs. They shine brightly and brilliantly. The lighting will be visible, whereas in Chinese copies it barely glows. Color Saturation - STERNHOFF tapes shine with vibrant colors. Cheap tapes have poor color reproduction. Our tapes shine with vibrant colors. Light Uniformity - Cheap substitutes using low-quality LEDs produce lighting of varying brightness and saturation. Our strips provide uniform lighting, allowing you to decorate the desired space. Quality of workmanship - This aspect consists of several elements. The strips can be frayed, and low-quality adhesives are used, which can cause them to peel off. You can find many cheap LED strips online. However, their price reflects their quality. By purchasing our product, you are purchasing a proven brand that cares about the quality of its products. Specification Manufacturer: Azaris Type: decorative LED strip Diode type: SMD 5050 3-chip RGB Epistar Number of diodes: 300 Light colors: RGB CRI (color rendering index): Ra >80 Lifespan: approx. 60,000 hours Number of RGB lighting modes: 4 Protection level: IP44 (resistant to dust and rain) Strip length: approx. 5m Tape width: approx. 8mm Power cable length: approx. 37cm Power supply voltage: 12V Mounting: Self-adhesive tape Temperature range: from -25°C to +60°C Power consumption: 14W Smooth transitions 3 or 7 colors Set composition LED strip Module with controller 12V power supply Remote control CR1220 battery (included with the remote control) SMD 5050 3-chip RGB Diode Each LED on the LED strip is a diode consisting of 3 RGB channels (red, green, blue). These are standard colors, the combination of which allows you to create virtually any color. Thanks to this solution, the strip can illuminate virtually any color and there are no large gaps between the diodes. Cheaper strips use three separate LEDs. Each illuminates one of the primary RGB colors. This means that it is not possible to set colors other than the primary ones. Turning off any color causes large holes between the light points. This strip does not have any of the above problems. The diodes are tightly placed next to each other. Switching colors does not turn them off and you can set any color you desire. This LED strip is used for interior design . It is one of the sales hits of recent years. Thanks to it, you can achieve fashionable multi-color lighting . The strip also allows for lighting with just one color from the RGB palette. The ability to cut and the high flexibility of the strip means you can attach it exactly how you want. It allows you to achieve atmospheric lighting . You can use it to illuminate a ceiling, desk, or TV. By using the tape it is possible to obtain both romantic mood and gaming style . The tape can be stuck in many different places, such as: Under the ceiling Under a cabinet / countertop By the stairs Backlighting behind a TV or monitor Remote control The color, intensity, and brightness of the light can be controlled using the included remote control. It is also possible to set one of four lighting modes. Lighting modes: Adjusting the light intensity (brighter/darker) Turning on individual static colors, out of 20 defined 6 arrow buttons - used to change the saturation of red, green and blue when programming DIY buttons DIY1-6 buttons are used to create and save 6 custom colors, e.g. various shades of warm, neutral, cool white. Subsequent pressing for a moment is used to quickly launch a previously saved mode. Jumping transitions of 3 or 7 colors Turning the LED light on/off PLAY/PAUSE - stopping in dynamic mode White light mode Speed adjustment in dynamic mode (faster/slower) Automatic mode (presentation of a mix of colors) FLASH flashing mode Smooth transitions of 3 or 7 colors The remote control can be used to decrease and increase the light brightness. This allows for both vivid colors and dimmed, atmospheric colors. The strip can also be turned on and off using the remote control. Waterproof The strip is waterproof . It has an index of IP44 . This means it can be connected outdoors and is resistant to rain and dust . A good solution is, for example, sticking it under a roof. However, please remember that only the tape itself is waterproof. The power supply and module are not resistant to water or dust! A good way is to protect these elements and cut off the light by a few centimeters. Strong and flexible The tape is made of durable material. Thanks to this, it has high breaking strength . This reduces the risk of it breaking during hanging or later use. Additionally the tape is flexible . The more flexible the tape, the easier it is to stick to the corners . Rigid tapes will peel off under force. Our tape will stick strongly to the edges. Trimmable The tape can be trimmed to your own discretion . has been marked with places where it can be cut without damaging it. After cutting, the tape will still function and will provide a strong and saturated light . This solution allows you to adjust the length to your needs. Please remember that cutting the tape in the wrong place can lead to its damage! Energy saving with strong light The strip diodes are made with LED technology. This keeps power consumption minimal. However, this does not mean that they emit weak light. They provide strong and vivid light . You will be able to illuminate an entire room without having to worry about high electricity bills . Universal connection The strip is connected to the control module using a 4-pin plug. More advanced users can take advantage of this. The included module has various lighting modes, but this can be expanded. By using, for example, an Arduino, you can increase the number of lighting modes to almost infinite . Adaptive lighting modes can also be set. A specially prepared controller connected to the TV and strip can control the strip to illuminate the TV in the same color as the one currently displayed on the screen. Advanced users will be able to customize the tape exactly to their needs and impress their friends with their skills
No-delivery refund
