*This product was previously advertised as being for vertical installation only, but after internal product testing, it can now also be used for horizontal installation. Although this is not mentioned in the instruction manual, there are no safety concerns.
When installing vertically or horizontally, please note the following:
* To prevent falling or tipping, be sure to securely fasten the rod to the wall or ceiling with staples or screws.
* Install the tension rod and lamp evenly, within the rod's weight capacity.
【DRAW A LINE】
This is a collaboration brand between Heian Shindo Kogyo, the top manufacturer of tension rods, and the creative unit TENT.
Previously, tension rods were often treated simply as "novelty items," but this brand redefines them as "a single line" that enriches daily life, proposing a new lifestyle that begins from there.
【Specifications】
■For use with Tension Rod only
■Product size: Width 11cm x Depth 18cm x Height 16cm (Shade size: Φ8 x 16cm)
■Power cord length: Approx. 3m (from socket to power plug)
■Power supply: AC100V 50/60Hz
■Socket type: E26
■Bulb type: LED bulb, general bulb type, 8W or less (brightness equivalent to 60W or less), total length 115mm or less, diameter 60mm or less *Please provide your own bulb
■Power consumption: 8W (power consumption of the LED bulb used)
■Switch: Rocker switch (on/off)
■Set contents: 1 main unit, 3 cord belts, 4 screws, 1 stapler, instruction manual
■Product weight: 0.6 kg (including cord)
■For indoor use only
《Check before installation》
● When assembling this product, please carefully read the instruction manual included with the Tension Rod and ensure correct and secure installation.
● Incorrect or incomplete installation can cause the fixture to fall or tip over, potentially resulting in injury, damage to the fixture/bulb, or damage to the surrounding area. This is extremely dangerous.
● To prevent the light fixture from tipping over, be sure to secure the EVA pad on the ceiling side of the Tension Rod to the wall or ceiling using staples (if the ceiling is made of plasterboard) or screws (if the ceiling is made of plywood).
● Installation is not possible in areas where the ceiling material is not plasterboard or plywood.
● Installation of the light fixture should be performed by two or more people.
● When installing using Tension Rod C, be careful not to let the connection between the upper and middle support poles come loose.
● Install the LED bulb after the installation work is complete. Also, keep the power plug unplugged from the outlet until installation is complete. (Bulbs must be provided by the customer.)
● Use the included cord belt to prevent slack in the power cord.
● Take care not to trip over the power cord when it is on the floor. ● Tripping over the power cord or pulling it forcefully can cause it to fall or tip over, resulting in injury, damage to the appliance/light bulb, and damage to the surrounding area. This is extremely dangerous.
● Do not install the product near a baby crib or playpen, or in a location where the power cord could wrap around a child's body. A power cord wrapped around a child's neck poses a risk of suffocation and is extremely dangerous.
● Products taken outside of Japan are not covered by the warranty.
● We cannot provide compensation for malfunctions or damage caused by force majeure such as natural disasters, or by improper use or modification.
Main unit size: Width 11cm, Depth 18cm, Height 16cm
【Brand Introduction】DRAW A LINE redefines tension rods, often treated simply as "convenience goods," as "a single line" that enriches life, proposing a new lifestyle that begins from there. The product features an extremely simple structure—"a single line"—on which various parts such as shelves, desks, and lighting fixtures can be attached.
A lamp that can be used in combination with the DRAW A LINE Tension Rod series, supporting both vertical and horizontal mounting. Because it attaches to the tension rod mechanism, lighting can be installed in various locations in a space-saving manner.
A spotlight that illuminates precisely. The height and angle can be freely adjusted to direct light to the ideal position. It can also be used as indirect lighting.
Switch: Rocker switch (on/off switchable at hand) Socket: E26 Bulb: LED bulb, general-purpose bulb type, 8W or less (brightness equivalent to 60W or less), total length 115mm or less, diameter 60mm or less *Bulb must be provided by the customer.
No-delivery refund
