Suction filter for 10 mesh Graco piston power pack, Rosfix Tornado RTR5 Fits Graco models: Ultra Max 795/1095/1595, GMax 3900/5900, Lo-Boy, High-Boy, LineLazer 3900/5900, EM 590, Ultra 750/100/1500, GM 3500/5000, Ultra 333/433, GM 7000 Lo-Boy, LineLazer 5000, Rosfix RTR5 Protection against contamination: Filters prevent dirt from entering the spray system, minimizing the risk of tip clogs and optimizing finish quality Three stages of filtration: Inlet mesh, pump filter, gun filter - each with different mesh sizes, ensure optimal material filtration Specifications: Female thread: 31.7mm Graco compatible models: Ultra Max 795/1095/1595, GMax 3900/5900, Lo-Boy, High-Boy, LineLazer 3900/5900, EM 590, Ultra 750/100/1500, GM 3500/5000, Ultra 333/433, GM 7000 Lo-Boy, LineLazer 5000 Mesh size: 10 mesh for high viscosity materials The perfect solution to ensure the highest spray quality and longevity of your equipment. Compatible with Graco power packs: ST Max 395 / 495 ST Max 390 ST Max 490 Ultra 395 / 495 / 595 Ultra Max 695 Lo-Boy G Max 3400 LineLazer 3400 Range of nozzle holes for different types of sprayed material: Pigments: 0.009″ Stains, Varnishes, Oils: 0.009″ – 0.011″ Primer: 0.013'' Urethanes, Epoxies: 0.013″ – 0.015″ Enamels, Emulsions: 0.015″ Acrylics: 0.015″ – 0.019″ Latex: 0.017″ – 0.019″ Exterior, facade paints: 0.021'' – 0.029'' Waterproofing agents: 0.023″ – 0.031″ Multicolor paints for construction: 0.023″ – 0.031″ Fire retardant coatings: 0.029″ – 0.035″ Elastomers: 0.025″ – 0.033″ Putties, smoothing compounds: 0.027″ – 0.035″ Bituminous masses: 0.055'' – 0.065'' Choosing the right nozzle is child's play with us! Here are a few steps that will help you make a decision: 1⃣ The first digit (A) means the width of the nozzle stream , we will mark it as "A". By multiplying the first digit "A" x 5 cm, we get the fan width we want when holding the gun 30 cm from the surface. So mathematically, this can be written as: Fan width = A x 5 cm Example: If the first digit "A" is 5, then the fan width is: Fan width = 5 x 5 cm = 25 cm This means that holding the gun 30 cm from the surface, we will get a fan width of 25 cm. 2⃣ The last two digits (B) - indicate the nozzle orifice size and paint density. The higher the number, the thicker the paint. For example, "517" is a nozzle with a fan width of 25 cm and a nozzle orifice diameter of 0.017 in.
No-delivery refund
