Feature:
1. Suitable for cleaning glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB circuit boards.
2. With two frequencies, you can choose the right frequency according to the actual situation.
3. 33KHz for gross rinse and 40KHz for intensive rinse.
4. With degassing and degreasing function.
5. 0 80 degrees C temperature range, 1 99 minutes working time.
6. Auto Stand by, Sleep, and wake up by one key press Mode.
7. Digital controller of high precision and a long service life.
8. Power sweep to prevent ultrasonic fatigue.
9. Die casting stainless steel tank.
10. Industrial grade integrated circuit.
Specification:
Item Type: Ultrasonic Cleaner
Model: DK 3000PF
Inner Groove Size: Approx. 500 x 300 x 200 x 0.8mm 19.7 x 11.8 x 7.9 x 0.03in
Dimensions: Approx. 550 x 330 x 380mm 21.7 x 13 x 15in
Inner Tank Capacity: 30L
Ultrasonic Frequency: 33KHz 40KHz (Operating Frequency Can Be Set)
Ultrasonic Power: 600W
Heating Power: 500W
Working Time Setting Range: 1 99Min
Temperature Heating Range: Up to 80 degrees C
Degassing and Degreasing Function: Equipped
Liner Material: SUS304 Stainless Steel
Shell Material: Stainless Steel
Basket: Equipped
Sound Reduction Cover: Equipped
Button Mode: Waterproof Touch Button
Water Valve: 1 2in
OPERATION:
1. Fill the stainless steel tank with cleaning solution; Plug the power into grounded outlet; After power on, the temperature displays the actual environmental temperature, LED displays 3 minutes (default ultrasonic time).
2. Time setting: Press the TIME+ TIME shortly at a time means time increase reduce 1min at a time, press and hold time switch continuously will increase reduce by 10mins. The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press Ultrasonic frequency button.
NOTE: Do not run the cleaner continuously for more than one hour
3. Temperature setting: Press temperature+ temperature shortly at a time means time increase or reduce 1 celsius at a time, press and hold time switch continuously will increase reduce by 10 celsius . Usually, the best cleaning temperature is within 40 celsius to 60 celsius .
4.After time and heat setting, press Heating or ultrasonic button to start both function. If press the ultrasonic again , the ultrasonic function will stop , and the heating function will stop at the same time. If want to keep heating, need to press heating button again.
5. Degas mode: work intermittently,i.e., 6s ON + 2s OFF working mode. It can clean items deeply and efficiently.
6. Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.
NOTE: Do not pour water out until it s cooling, because of hot water will hurt you and also empty burn will damage the machine itself.
FAQ:
Q: What is an ultrasonic cleaner?
A:Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently.
Q: Which products can the ultrasonic cleaner clean?
A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc.
Q: Which builders can be properly added for better cleaning during the cleaning process?
A: You can add cleaning liquid or detergent, such as: detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage.
Q: Common products have 40HZ or 33HZ. What is the difference between these two different frequencies?
A: These products are divided into high frequency and low frequency. Generally, the high frequency has 40HZ and 42HZ, and the low frequency generally has 28HZ and 33HZ.
The higher the frequency, the larger the number of bubbles generated, the smaller the bubbles, and the better the cleaning effect for some blind holes;
The lower the frequency, the smaller the number of bubbles produced, the larger the bubbles is suitable for cleaning large surfaces. Products with both frequencies can be better cleaned.
Q: What is the degassing function? What does this function do?
A: The ultrasonic cleaning machine will discharge the air inside the cleaning liquid during use. During the use process, the air content in the cleaning liquid will be reduced. If the cleaning time is too long, ultrasonic fatigue will occur, which will affect the cleaning effect.
The degassing function is that during the use of the washing machine, the equipment stops vibrating periodically for a short period of time. During the vibration stoppage, the outside air is injected into the cleaning liquid due to the pressure difference between the inside of the cleaning liquid and the atmosphere. This can achieve a better cleaning effect.
Q: What is the Power Sweep function?
A: The product has two frequencies, high and low. If only one frequency is used for cleaning, the cleaning effect is not satisfactory.
The Power Sweep function works alternately between high and low frequencies. After a period of high frequency operation, it automatically switches to low frequency for a period of time, so that the cleaning time is longer and the cleaning is more comprehensive. Thereby achieving an optimal cleaning effect.
.
Package List:
1 x Ultrasonic Cleaner1 x Power Cord 1 x User Manual
Note:
1. While the machine is working normally, the syntony of the ultrasonic wave and tank gives a well proportioned sound with no shudder on the surface of the water but sprays generated by the tiny bubbles. If there are discontinuous surges, please add or reduce a little of washing solution in the tank to stop the surges, which is good for get a better cleaning effect. 2. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not warm, because the warming and long time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic equipment;3. Never use flammable and corrosive detergents;4. When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic waves must not be turned on;5. Prevent the cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, and burning the electronic components;6. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury);7. When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! (After cleaning, do not accumulate in the cleaning tank!)8. Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry;9. Please don t make the machine work for a continuous long time (not more than 60 minutes) as possible as you can because a long time working will raise the temperature of the case, accelerate the burn in process of inner electronic components and parts.
No-delivery refund
