MYmama Plastic Hot Melt Glue Gun for Crafts and DIY (Glue Gun Only)

■Product Number: SD-A601 ■Compatible Size: 7.0mm-7.5mm diameter glue ■Set Contents: Glue Gun, Wire Stand, 10 Glue Sticks, Japanese Instruction Manual, Clear Case ■Material: Body: Plastic ■Voltage: AC 100V ■Temperature: Approximately 180°C ■Frequency: 50/60Hz ■Power: 20W ■Uses: Artificial flowers, decorations, metal, wood, paper, fabric, plastic, toy models, DIY (home improvement), electronic circuit boards ■How to Use: 1. Attach the wire stand to the glue gun. 2. Insert a 7.0mm-7.5mm diameter glue stick into the back of the glue gun. 3. Turn on the power and let it preheat for 3-5 minutes. Then pull the trigger to dispense the glue. *Do not remove the glue stick once inserted. If you cannot use up the entire stick, store it inserted. If the glue is too long to fit in the case, we recommend folding it and storing it away, as cutting it would be a waste. ★The next time you use it, the glue remaining inside the device may take some time to melt, resulting in poor flow and only a small amount coming out. Turn it on and preheat it for 3-5 minutes, letting out the glue little by little. Continuous use time is approximately 10-30 minutes.