Origin : Mainland China
Rated voltage : 12/24V
Rated current : 30/40/50/60/100A
Max. PV voltage : 50V
Max. PV input power : 750W(12V) / 1500W(24V)
Features:1. Industrial-grade master chip, 16 AD sampling accuracy, temperature, charging current,
discharge current accurate real-time display, power generation at a glance.
2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection
during charging, bidirectional focusing tracking.
3. Large-screen LCD display, adjustable charging and discharging parameters. UItra-wide charge
and discharge adjustable, as long as you understand the characteristics of the battery set its
corresponding charging parameters, you can charge a battery. When the output is off, the time
can be adjusted, which is more convenient. (on the market, there is no point adjustment)
4. Acomplete three-phase charge management, effectively protect the battery, the battery is more
durable.
5. Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection
protection,when the fault is eliminated, the controller automatically recovers, does not damage
the device.
6. Bidirectional MoS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
7. R5. 0 solar charging DC plug, R5. 0 DC lamp output DC plug, convenient connection.
Warning:
precautions for using solar charge controllers
1. Pay attention to the positive and negative polarity and order of the wiring, connect the battery first, and then connect the solar panel
2. The connection should not be loosened, otherwise it may occur sparks and even cause a fire.
3. It is strongly recommended that batteries and load terminals are coupled with fuse devices
4.we recommend 12V battery with 18V solar panel,24V battery with 36V solar panel.
5.12V battery is 10V-15V, which will change under different capacities and temperatures
6. It is recommended that the charging current is less than 0.2C, such as 100AH battery charging current within 20A.
7. when charging and discharging current is too small,(I<0.2A) it may not display or displayed inaccuracy, but the controller is still working.
Specifications
1. Rated voltage:12/24V
2. Rated current: 30/40/50/60/100A
3. Max. PV voltage: 50V
4. Max. PV input power: 750W(12V) / 1500W(24V)
Function:
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during
nights.
5. Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will
automatically cut off the load from the system. If the voltage of
battery is back to normal and the load will restart working.
8. Thunder protection
9. According to the battery voltage grade, the controller can
automatically set charge-off voltage, the load-off voltage, the
load- restore voltage. (The parameter is default under 25celsius
condition, locked by the CPU procedure, cannot adjust.)
10. The controller will automatically compensate the temperature of
the charging voltage according to the changes of ambient temperature.
Package Includes:
1 x Solar Panels Battery Charge Controller
1 x User Manual
Dear buyers, we appreciate your business, if you are satisfied with our service,
please leave us a positive feedback and rate the details of the transaction (Detailed Seller Ratings) with a
;PERFECT 5 STARS;.
If you have any problems, broken, quality problems, please don't worry, and don't leave bad feedback.
Please send us an email first, we will reply you as soon as possible, please allow us to respond within 12 hours.
We understand your mood, and will provide you with the best solution for your problem,
please give us the opportunity to solve the problem,
For any case,please feel free to come to us,we are always here.
look forward to and thank you for your trust.
No-delivery refund
