Features:
*Use for 17/18/19 Band Saw Wheel, Width is 34.42mm (1.35'').
*It is suitable for 17/18/19-inch woodworking band saw wheels, but it does not mean that our Rubber Band size is as large as 17/18/19 inches.
*The rubber band needs to be stretched. After receiving the goods, put them in hot water and heat them to spread evenly.
*Then hang it hard on the wheel without adding glue!
*In order to for ensure that the anti-skid rubber for ring can be tightly combined with the outer edge of the wheel, and avoid slippage during sawing and insufficient cutting force due to the loose rubber for ring, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel.
*Please make sure you know the above information before purchasing.
Installation method:
1. Remove the damaged rubber for ring. If there is rubber for ring on the outer edge of the wheel, please clean up the .
2. Soak the new anti-skid rubber for ring in warm water for 3-5 minutes, and install it after the rubber for ring is softened.
3. When installing, start from side of the wheel, press end of the rubber for ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber for ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber for ring is damaged.
4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to for ensure a more secure installation.
Specifications:
Product Name: Band Saw Rubber Band
Material: Rubber
Color: Black
Width: 34.42mm / 1.35''
Suitable for: 17/18/19 Inch Woodworking Band Saw
Quantity: 1Pc
Package Included:
1 × Band Saw Rubber Band
Note:
1.Transition: 1cm =10mm =0.39inch.
2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
3. Please allow slight manual measurement deviation for the data.
