10cm Photoelectric Switch PNP NO Proximity Sensor DC636V E3FDS10P1

Features: Photoelectric Switch uses the blocking or reflection of the detected object to the beam, to detect the existence of the object. Photoelectric Switch converts the input current into a light signal on the transmitter, and the receiver detects the target object according to the strength or presence of the received light. Objects are not limited to metal, and all objects that reflect light (or block light) can be detected. The switch stays open, and closes when it detects the object in detection range. High precision, quick response, strong anti interference capability. Specification: Model: E3F DS10P1 Detection Range: 10cm, + 10percent Detection Range Adjustment: sensitivity regulator Detection Target: transparent opaque object Response Time: 1ms On delay: 1.5ms Light Source: infrared light 660nm Current Consumption: N.P type: <20mA, A type: <1.7mA Control Output: N.P type: <300mA, A type: <400mA, J type: <2A Contact Life: 100,000 times Circuit Protection: N.P.D type: reverse connection protection, surge absorption, load short circuit protection; A type: surge absorption Operation Environment: 30 65 degrees C (no freezing, no condensation), 35 95percent RH Temperature Influence: temperature range 30 65 degrees C, at +23 degrees C: + 15percent detection distance; temperature range: 25 60 degrees C, at +23 degrees C: + 10percent detection distance Insulation Impedance: >50M Ohm (DC500 megohmmeter), between charging part and housing Housing Material: ABS Detection Surface (lens): PMMA Weight: 61g (approx.) Package List: 1 x Photoelectric Switch .