DEEDS GDZ630CT Thinning Shears Thinning by a Japanese Professional Hair Scissors Manufacturer For Professional Hairdressers and Haircutters 2-Stage

The material used is 440C, which has high abrasion resistance, viscosity and toughness. A basic eyeglass-style handle that can be used by a wide range of users, from beginners to veterans. The new two-stage blade cuts while avoiding the cut, making the cut line less noticeable. [Size] Skiving ratio: approximately 25% Size: 6.0 inches Material: 440C Rockwell hardness: HRC-59 Suitable for both wet and dry use Overall length 170mm, blade length 75mm, finger holes, moving blade 21 x 18mm, stationary blade 21 x 18mm, weight 59g [Caution] Do not try to cut a lot of hair at once by holding too many bundles or opening and closing the blade widely, as this may cause the blade to push through and cause problems. *The total length is the length from the little finger loop to the tip of the blade. * Blade length is the length from the center of the screw to the tip of the blade. *The thinning rate is a reference value. It may vary depending on hair type, thickness, angle, and other conditions. Compared to regular thinning shears, the two-stage blade allows hair to escape while cutting, allowing for fine adjustments. The finger loop is removable. Compared to previous thinning shears, it cuts much better. (When purchased, the screws are slightly tightened to prevent damage to the blade. Hold it vertically and loosen it slightly so that one blade can fold naturally.) *This product is for professional use, intended for hairdressers and barbers. The blade is as sharp as a razor, so please use and store with care.