Kegland PCO1881- 3/4' Female Ball Valve Stainless Connector Suit FermZilla Keg Lid Beer Accessories Home Brewing

KL18074PCO 1881 Stainless Ball ValveThis really handy stainless adaptor ball valve will enable you to connect two PCO 1881 threads with a valve in between. Each side has an integrated O-ring that will seal on the neck of the PCO1881 Thread. Ideally suited to making a dry hop device for FermZilla. This stainless ball valve assembly has the PCO 1881 female thread on both sides. The 20mm bore (approx.) makes it possible to put some dry hops into a Coke bottle or other soft drink bottle, attach it to the ball valve and use a closed loop to dry hop into your FermZilla Fermenter. As show in the photo if you use this stainless ball valve in conjunction with the PCO 1881 Tee Piece and the Carbonation Cap, you will have the added advantage that you will be able to use CO2 gas to purge out oxygen from the hops before you dry hop. This assembly makes an inexpensive and very effective dry hopping tool. NOTE: Dry hop pellets will require a bit of a shake to get them to fall through the 20mm bore.  If you tap the PET Coke bottle this should be enough to make the hops fall down into the fermenter through the ball valve.

---------------------------------------

KL18487Stainless Ball Valve PCO 1881 - 3/4' FemaleThis really handy stainless adaptor ball valve will enable you to connect a fitting with a 3/4" BSP male thread to the PCO1880 threads on a FermZilla lid. This is ideal for connecting tri-clover fittings to your FermZilla lid allowing oxygen purged dry hopping of your brew. This stainless ball valve assembly has a PCO 1881 female thread on one side for attaching to the male thread on the lid of your FermZilla and a 3/4" BSP Female thread on the other side for attaching to tri-clover fittings for example.The 20mm bore (approx.) makes it possible to perform low oxygen dry hopping through this ball valve.NOTE: Dry hop pellets will require a bit of a shake to get them to fall through the 20mm bore.  If you tap the PET Coke bottle this should be enough to make the hops fall down into the fermenter through the ball valve. If you are wanting to use a coke bottle or other soft drinnk bottle for low oxygen dry hopping with the FermZilla then please use the PCO1881 x PCO1881 Female Ball Balve - Dry Hop Device for FermZilla