Ceramic G24 To E26 E27 Socket Adapter 2 Pin 4 Pin Gx24 Short Type Heavy Duty Secure Connection Compact Design

Base Type: Pin Type Color: White

Features: - Need BYPASS OR REMOVE the ballast before install E26/E27 Lamp, otherwise it may burnt, flick, smell etc. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter - Q series has a shorter tip than D series. - There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work. - All pin based CFL, like GX24Q G24 GX23 G23 are lamp ballast separated, but all screw in E26 E27 are lamp ballast integrated. Ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high. - Save you a lot of troubles to replace your original CFL lighting fixtures. Easily transfer your Gx24 fixture to fit any of the E26/E27 standard medium base light bulbs. - NEED REWIRE/BYPASS/ REMOVE the ballast,the Ballast has a black and white wire on the input side, two red and two blue output side. To bypass this ballast,cut all the Input and output wires,and connect 2 Red to Black,2 Blue to White wire. The short version 2-pins and is suitable and compatible with 2P CFL G24D-1,G24D-2,G24D-3, GX24D-1, GX24D-2, GX24D-3, 2pin socket, Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on.G24d, not GY24d, both are 2p in cross(not in parallel) but Pins position are opposite. The short version 4-pins and is suitable and compatible with 4 Pin G24Q-1, G24Q-2, G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3 (Please confirm what base you need before you buy). Note: - REWIRING & REMOVING/BYPASSING THE BALLAST AT THE LIGHT FIXTURE IS REQUIRED FOR THESE ADAPTERS TO FUNCTION PROPERLY. PLEASE CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. - DO NOT OPERATE THE LED BULB WITH A BALLAST IN THE FIXTURE. DOING SO WILL LIKELY CAUSE THE BULB FLICKERING AND EVEN SMOKING!!

Package Including: 1 x Socket Adapter

The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.