Feature:
1. 12?key remote control, can control multiple pool lights at the same time, RGB lighting effects, seven static colors, 3 dynamic effects, you can choose the light color you like to make your pool more colorful.
2. AC12V safe working voltage, safe and reliable, avoid the dangerous of electric shock, rest assured to use (12v transformer is required for installation, not included)
3. The lamp body is made of high?quality PC+ABS+ resin material, which is corrosion?resistant. It is still suitable for beach baths. With the addition of IP68 ultra?high waterproof grade and technology, it is not afraid of water leakage and can be used with confidence.
4. Ultra-high technology, using 252 high-quality 2835 SMD lamp beads, uniform light emission, low light decay, high brightness, 120 degree light emission, wide irradiation range and long service life.
5. It is widely used in courtyard swimming pools, swimming pools, underwater lighting decoration, landscape lighting, garden lighting, garden engineering design, public fountain squares, public or private swimming pools and other fields.
Specification:
Item Type: Pool Light
Material: PC+ABS+Resin
Weight: Approx. 1220g / 43oz
Diameter: Approx. 26.2cm / 10.3in
Height: Approx. 4.3cm / 1.7in
Line Length: Approx. 180cm / 70.9in
Process: The inside of the lamp body is filled with highly difficult and fully enclosed resin, which is water-proof
Battery for Remote Control: 1 x 23A 12V alkaline battery (Not Included)
Voltage: AC12V
Power: 18W
Color: RGBW
Lamp Beads: 2835 SMD Lamp Beads
Number of Lamp Beads: 252led
Luminous Flux: 2500LM
Beam Angle: 120 degrees of astigmatism
LED Life: 50000h
Waterproof Rating: IP68
Installation Notes:
1. Drill 5 holes (four screw holes, one wire hole) on the swimming pool wall, and install the fixing bracket on the swimming pool wall with 4 long screws and 4 expansion screw tubes.
2. Pass the 180cm power cord through the wire hole on the wall to facilitate subsequent connection to the power supply
3. Use short screws to fix the lamp on the bracket through the screw holes on the surface of the product (the area around the fixing bracket must be flat and flush with the surface of the fixing bracket, which ensures the distance between the lamp and the wall No clearance fit.
4. Disconnect the total current, ensure that the surface is installed in place, connect the power cord to the AC12V transformer output line, and connect the other end of the transformer to the output power supply
5. Install a 23A 12V alkaline battery in the remote control (not included)
6. Turn on the power, turn on the lights, and complete the installation
7. Pull out the receiving antenna of the remote control to control the light switch, color and mode..
Package List:
1 x Lamp (Battery not Included)1 x Light Fixed Frame1 x Remote Control1 x Remote Control Manual1 x Remote Control Cover1 x Lamp Manual4 x Long Screw1 x Short Screw4 x Screw Expansion Tube
