[Product Infomation]
Brand : FUJIMI
Materials : polyester
[Product Description]
-Plastic model kit that requires assembly. Separate tools required.
-Multi-colored molding allows you to enjoy painting as you like.
- Snap fit, no adhesive required.
Product introduction
The second new mold for the 1/12 scale snap-fit motorcycle model "Honda Hunter Cub" The product is based on the CT125 Hunter Cub (Glowing Red) that was released in 2020. It is a Japanese domestic specification equipped with tandem steps and a muffler cover. The product is in a kit format that requires assembly. The size unique to 1/12 scale accurately reproduces the detailed modeling. [No painting or gluing required] Each part is colored with the molding color, and the body has a glossy texture that cannot be obtained with painting. The design allows for easy assembly by fitting the parts together. The first Cross Cub appeared in the 2010s, and the current Super Cub debuted in 2017. In 2020, the ``CT125 Hunter Cub'', which is reminiscent of the former CT110, was released. It has a slightly larger body than the C125, and is finished as a leisure bike with powerful mid-to-low speeds, and has a distinctive shape like the CT110's muffler and square turn signals. The actual car is available in two colors: glowing red and matte fresco brown (as of spring 2021). The body uses a special molding material to reproduce a level of gloss that is difficult to express with paint. There are six molding colors: red, black, silver, aluminum, clear, and clear red. The engine body is assembled into blocks with black and silver molding colors. The "HONDA" engravings on the left and right sides are reproduced with delicate mold engravings. The characteristic intake passage on the rear left side is reproduced in two colors: matte black and body color. The side stand and center stand are movable. The switches around the handle are accurately three-dimensionalized, and the markings are reproduced with the included stickers. The meter has a realistic style by covering the cover surface with transparent parts. The wing mark in the center of the handle is expressed with a sticker, and even small parts such as the master cylinder on the right hand side are reproduced. The seat has a three-piece structure that matches the seams of the fabric, and is molded in a matte black color. The seat can be moved (opened and closed). The area around the inner fuel filler port is now three-dimensional, and the tank cap is a separate part to express the difference in color tone. The tandem step can be stored or expanded, and can be changed by replacing parts. The very noticeable and distinctive rear carrier uses a slide mold and is a one-piece part. *This product is made in Japan. *This product is a plastic model kit that requires assembly.
safety warning
none
[Important Note - For Overseas Customers]
Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.
1. Legislation and safety standards
This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country.
Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.
2. About electrical products
[Voltage compatible]
When using electrical appliances, please be aware that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.
[Plug type]
Our products use the Japanese plug type (A type or B type).
Please use a conversion adapter if necessary.
[Important notes regarding transformers and adapters]
A transformer adjusts the voltage to suit the requirements of the equipment.
Conversion adapters only change the shape of the plug and do not adjust the voltage.
Using only the conversion adapter without a transformer may damage the product.
[About responsibility]
We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.
3. Language and manual
Product instructions and displays may only be in Japanese.
The English version of the manual can be downloaded from our website.
4. Regarding product returns and exchanges
Please note that if you wish to return or exchange an item, you will be required to submit a video of the unpacking process.
