Descriptions:
The meter is full compliance with national standards GBT17215.3212008 and IEC62053 international standard of grade 1 level of the relevant technical requirements of the single phase KWh meter,can measure the active power energy , by 6 digital display total electricity consumption,It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology, and installation of 35mmDIN standard guide rail.It has good antielectromagnetic interference, low power consumption, high precision, high overload, high stability, anti theft and long life.
Features:
It has the advantages of convenient meter
reading, high reliability, small volume, light weight, beautiful
appearance, advanced technology.
Installation of 35mm DIN standard guide rail.
This meter is suitable for the measure the singlephase AC efficient electrical energy of rated frequency 50Hz,used for fixed installation indoors.
Apply to the environment temperature is
less than 25 celsius ~ + 55 celsius , relative humidity is not more than 95percent , and in
the air without corrosive gases and avoid dust, mold, salt fog,
condensation, insects, etc.
It has good antielectromagnetic
interference, low power consumption, high precision, high overload, high
stability, anti theft and long life.
Specifications:
Standard: IEC6205321
Display:6digit
Color: White
Current: 10(40A)
Frequency: 50Hz
Impulse constant: 1600impkWh
Operating Humidity: less than 95percent
Operating Temperature: 25 celsius ~ + 55 celsius
Size:10 x 7.5 x 6.5cm3.93 x 2.95 x 2.55inch
Weight: 276g
Installation and use:
1. Installation of energy meter required experienced electrician or professional, and determined to read the manual.
2. energy meter should be installed in the indoor ventilated and dry place, adopt 35mmDIN standard guide type installation, the bottom plate of the electricity meter should be fixed in the wall that is strong refractory, and not easy to vibrate.
3. Electricity meters should be installed in protective cabinets in places where there are filth and potential damages.
4. Install according to the wiring diagram ,it is best to use a multistrand copper wire to avoid the failure of the electrical energy meter working or burning down.
5. When the electricity meter is correctly connected to the power grid, the power indicator of the meter is light.
6. Electric energy meter should take the lightning protection measures when it is used in the area with more lightning, so as to avoid damaging the electric energy meter by lightning.
7. The load capacity of the energy meter is in the range of 0.05Ib ~ Imax (direct access) or 0.02Ib ~ Imax (through the access type of the transformer),More than the transformer ratio,is the actual power consumption
8. Data display: the meter display
9. Power indication: the green light indicates that the power meter has normal working power
10. Pulse indication: when a red light indicates that the power pulse is detected
11. When there is a sampling signal, the pulse light is about 80ms
Package Included:
1 x Energy Meter
.
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
It has the advantages of convenient meter reading, high reliability, small volume, light weight, beautiful appearance, advanced technology
Installation of 35mm DIN standard guide rail
This meter is suitable for the measure the singlephase AC efficient electrical energy of rated frequency 50Hz ,used for fixed installation indoors
Apply to the environment temperature is less than 25 celsius ~ + 55 celsius , relative humidity is not more than 95percent , and in the air without corrosive gases and avoid dust, mold, salt fog, condensation, insects, etc
It has good anti?electromagnetic interference, low power consumption, high precision, high overload, high stability, anti ? theft and long life
