For Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 To 2025 Above-Auto Styling Stylish Diffuser Spoiler Skirts Wings Ornament Cars

Peugeot Rifter Chrome Front Grille 6 Pcs. 2019 and Above

Vehicle-Specific Chrome Accessory Product features: Chrome products are produced with a mold system specially for the part on which it will be applied on the vehicle. Chrome products are produced from A class A 304 stainless steel. The products are sent ready for assembly with the high double-sided acrylic tape on the back.

Assembly Instruction: Make the assembly in a dry and dust-free environment. After unpacking the product, make sure to perform an assembly exercise on the area where it will be applied without removing the protective surface of the double-sided tape on it. Thoroughly clean the surface to be adhered to with a cleaning liquid (alcohol, spirit, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) Cleaning of the floor is very important for assembly. Plastic parts with oily and shiny surfaces such as glass wick, door protection tape should be cleaned until this floor disappears. If there is an adhesive reinforcing "Primer" wipe in the product (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on the painted surfaces of the vehicle), apply it to the cleaned surface only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply to the parts where the product will not stick/cover) The ambient temperature must be above 25°C for the double-sided tape on the back of the product to show its full properties. After removing the protective surface of the tape, use a hair dryer, etc., to increase the adhesion force. Apply heat to the tape with the help of After removing the protective surface of the tape on the back of the product and applying heat, apply the product at once to the cleaned and, if necessary, primed area. Apply pressure with a dry cloth to ensure that it adheres well. In order for the product to adhere firmly, protect it from water for 24 hours and take care not to wash your vehicle with pressurized water for 48 hours.