For Peugeot 208 Chrome Side Door Trim 4 Pieces 2012 To 2019 Models Stainless Steel - Sporty Body Kit Spoiler Diffuser Bumper Car

Product Features: Chrome products are produced with a mold system specifically for the part on the vehicle where they will be applied. Chrome products are produced from class A 304 quality stainless steel. The products are shipped ready for installation with high quality double-sided acrylic tape on the back. Assembly Instruction: 1- Install in a dry and dust-free environment. 2- During installation, the ambient temperature should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with . 3- Before removing the tapes of the part to be bonded, first try the assembly, starting from the oval and closed surface. 4- Clean the surface to be bonded meticulously with a cotton cloth, alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne. 5- After cleaning the surface to be bonded, wait 5 minutes and then start the bonding process. 6- Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface. 7- During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using . CAUTION: Since the tape used will show its full properties within 24 hours, use the glued part carefully during this period. To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours. Be careful not to wash your vehicle within 24 hours. WE WISH YOU HAPPY SHOPPING...