Sondery Guitar Hanger Wall Hanging Stand Hook Wall Holder Ukulele Bass Automatic Locking Easy To Install On Wooden Wall or Wooden Stud Plasterboard

Ships from Japan Adopts gravity self-locking technology. When you place the guitar neck on the arm, the guitar will automatically lock. And when you pick up the guitar, it will automatically release. Prevent the guitar from falling after hanging and increase safety and effectiveness to protect the guitar from damage. High quality hardwood base, sturdy and durable. The plastic rubber foam pad arm can effectively protect your equipment and prevent scratches and bumps when putting the equipment in and out. Easily attach this guitar hook to concrete walls, wooden walls, or drywall in just a few steps. Unique push-and-turn design allows for easy installation in seconds. Equipped with 2 long screws (4 cm), rubber plugs, drywall anchors and positioning stickers to firmly support the equipment and facilitate installation. wall mounted hangers help save more room space. Makes lifting the instrument more convenient. The product design is simple and stylish, suitable for family and professional environments. Guitar wall mounts are designed for all types of headstocks. Suitable for a variety of stringed instruments, including acoustic guitar, classical guitar, electric guitar, bass, ukulele, mandolin, etc. How to use screws and anchors / ▪Gypsum board installation 1. Apply the position sticker to the drywall and make sure the sticker is aligned vertically. 2.Turn the screw clockwise and put it into the drywall at the dot position, then tighten the screw counterclockwise to make two holes. 3. Turn the drywall anchor clockwise into the hole all the way. 4. Place the wooden base and screw the long black screw through the pilot hole in the base and into the drywall anchor. 5. Push the hanger body into the base and turn it to the final installation position (with the logo facing up). / - Installation on a brick wall 1. Paste the position sticker on the brick wall and make sure the sticker is placed vertically. 2. Use a power drill to drill two holes at the point locations. Please note that the drill bit has the same specifications as listed on the location sticker. 3. Use a hammer to knock the brick wall anchors into the two holes. 4. Place the wooden base and screw the long black screw through the pilot hole in the base to the brick wall anchor. 5. Push the hanger body into the base and rotate it to the final installation position. (with the logo facing up). / ▪Installation on a wooden wall or wooden studs 1. Use the hanger wood base for positioning and make sure the base is placed vertically. 2. Use a screwdriver to screw a long black screw through the pilot hole directly into the wooden wall or wooden stud. 3. Push the hanger body into the base and turn it to the final installation position (with the logo facing up).