Feature:
1. The product has anti‑vibration and anti‑interference function, and the efficiency is 88%
2. The power supply has global full range AC input voltage, the input voltage is 100‑240VAC
3. Using the din rail mode, installed on the DIN rail TS35/7.5 or 15, the installation is simple and convenient
4. With short circuit /overload /overvoltage /overheat function
5. Made of high quality aluminum alloy material, and long service life, not easy to damage
Specification:
Item Type: Switching Power
Product Material: Aluminum alloy
Product Model: NDR-75-24
Output Range: 24V, 0-3.2A
and Noise: 150mV
Efficiency: 88%
Overload : Constant current limit when the rated output power reaches 105%～130%, and it will automatically recover after the load is normal
Overheating : Overheating shutdown, automatic recovery after the temperature drops
Start-up and Hold Time: 1200ms, 60ms, 60ms/115VAC, 2000ms, 60ms, 12ms at full load of 230VAC
Insulation Characteristics: Between Input And Output: 3KVac, Between Input and : 2KVac, Between Output and : 0.5KVac, 1 minute
Working Temperature: -20～+70℃(reference for output derating curve)
Vibration Resistance: 10～500Hz, 2G 10 minutes/cycle, XYZ each 60 minutes; installation conforms to IEC60068-2-6
Safety Certification: Passed UL508, TUV EN60950-1 certification
Electromagnetic Compatibility Standards: Emission: EN55022 (CISPR22), EN61204-3, Class B, Harmonics: EN61000-3-2, -3
Electromagnetic Compatibility Standards: Anti-interference EN61000-4-2,3,4,5,6,8,11, ENV55024, EN61000-6-2 (EN50082-2), EN61204-3, Class A heavy industry standard
Mean Time Between Failures: ≥486,200 hours, MIL-HDBK-217F (25℃)
Wiring Mode: Input End: 3 Points. Output End: 4 points screw DIN terminal
Chassis Number: 221B
Product Size: Approx. 102 x 125.2 x 32mm / 4 x 4.9 x 1.3in(WxHxD)
How to Use:
3. Before using the power supply, please confirm whether the ground wire is properly connected, and mark the position of the specific power ground wire in the figure.
4. The power supply must be placed in a well-ventilated place with fast heat dissipation before and after use.
5. The determination of the output current of the rail power supply is closely related to the environment. It is determined based on the rated standard current of the rail power supply provided by the equipment or the average current value measured by a multimeter. And in the case of high ambient temperature, poor flow conditions, and excessive inductive load, 20-30% more current margin must be prepared.
Package List:
1 x Switching Power
