1. This equipment is suitable for poultry animals such as chickens, ducks, geese, quails, etc. It is forbidden to pluck the long hair. When the long hair is plucked, there will be a lot of curly hair, which will expand the cone head, or even get stuck. During use, when the curled hairs accumulate a lot on the cone head, please stop the machine to clean up before continuing to work. The purpose is to prevent the small hair from curling too much, which will affect the later use. Normally, we can first remove the long feathers by hand or by a plucking machine, then use this equipment to remove the small feathers. You can see that the effect is excellent. Note: This equipment can only be used for plucking short feathers and small feathers of poultry, neither for long feathers, nor for plucking human hair and other parts of hair.
2. After using for a period of time, if the clamping force of the cone head is a little loose, you can adjust the side nut and twist it in half a turn clockwise. It should not be twisted too much, because the inner part is a bearing. Too much screwing may also break the bearing. When you find that the clamping force is a little loose again after using for a period of time, it is enough to twist it for another half turn. The bottom nut is used to adjust the balance of the cone head. It has been adjusted when producing and basically does not need to be adjusted.
3. Every one week or so, drip a drop of lubricating oil (gear oil) on the root hole place of the auxiliary bearing (oblique shaft) to lubricate the bearing and prevent rust. (Attention: Do not drip too much, just one drop is enough, too much oil will enter the motor and cause damage)
4. This equipment is not completely waterproof, it is forbidden to immerse the whole machine in water, and it is forbidden to operate the machine in water.
5. During working, when the cone head rolls up a lot of small feathers and accumulates a lot, turn off the switch first and then clean it up. When the motor is running, it is forbidden to touch the cone head with any part of your body.
6. This equipment has a high-speed rotating motor. When working continuously, the hand-held part will be a little hot. This is a normal phenomenon as the the heat generated when the motor rotates. After 25 minutes of continuous startup, it is recommended to stop for a few minutes before continuing to work. The purpose is to cool the equipment, so as to maintain the equipment and prolong the life of the equipment.
7. Handle with care and pay attention to protect the cone head part, to avoid deformation caused by falling to the ground. Please MAKE SURE to unplug the plug after finishing.
Name: Handheld Electric Poultry Plucker
Material: Stainless steel cone head
Input voltage: AC100~240V 50/60Hz
Output voltage: DC24V=3A
Motor power: 65W
Power cord length: More than 2 meters
Product application: Chicken, duck, goose and other poultry
Features: Good friction, easy to remove small hair, does not hurt the flesh
Origin : Mainland China
