For Opel Crossland

It is made of 1st Class 304 stainless steel material, which offers the highest visuality and durability. Thanks to the superior quality double-sided acrylic tapes on it, it offers practical and easy installation without damaging the vehicle. For products that require adhesive reinforcement, silicone is also sent in the box. .Before assembly, pay attention to the steps and warnings in the assembly instructions in the box. An adhesive strengthener (primary) is sent in the box. All OMSA LINE products have ISO 16949, ISO 9001:2008 and TUV-CERT certificates. Assembly Instruction: Install in a dry and dust-free environment. .Before assembly, do an assembly exercise in the area where it will be applied without removing the protection of the double-sided tapes on the part. Clean the surface to which the product will be adhered with alcohol, alcohol, cellulosic thinner, etc.. Clean meticulously with . Silicone, gasoline, cologne, etc. Do not clean with additives or oily substances! In order to fully show the properties of the double-sided tapes sent ready for installation on the product, do not use a hair dryer, etc.. on the surface to be mounted. Apply heat with . Apply the Primer wipe included in the box to the cleaned surface. Be careful not to apply the product outside the area where it will be adhered. Apply your product in one go by removing the protective surface of the double-sided tapes on the cleaned and heat-applied surface. After the application, ensure that it adheres well by applying pressure with the help of a cloth. Be careful not to get water on the relevant area for 24 hours.