The product is effective against mold, microscopic fibrous fungi, algae, lichens and has a pronounced bactericidal effect. It is used to eliminate mold primarily on walls, as it has a bleaching effect, as well as on facing tiles, around sinks, bathtubs, windows or kitchen cabinets, removes gray and black stains from walls and ceilings, whitens the surface and eliminates unpleasant odors.
Precautions: Do not use together with other products. May release hazardous gases (chlorine). Use protective gloves/protective clothing/safety glasses/face mask.
In case of contact with skin (or hair): Remove all contaminated clothing immediately. Rinse skin with water/shower.
In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contaminated lenses. Continue rinsing.
In case of inhalation: Remove source of contamination, provide victim with fresh air, avoid physical exertion (including walking).
Avoid contact with the product. Do not apply to aluminum, copper, brass, bronze (rinse metal objects immediately with water), colored and varnished wood.
Caution: Causes severe skin burns and eye damage. Highly toxic to aquatic organisms. May be corrosive to metal. Keep out of reach of children. Avoid release to the environment.
Product description Mold remover Galax Das Power Clean Cleaner, 500 g
For a spotlessly clean bathroom, use Galax Das Power Clean mold remover . It is suitable for treating walls, tiles, sinks, bathtubs, windows or kitchen cabinets.
How does it work?
Effectively removes mold and fungi.
Provides a pronounced bactericidal effect.
Whitens surfaces, restoring their original appearance.
Eliminates unpleasant odors.
The product is manufactured in Germany according to German quality standards.
Product composition Mold remover Galax Das Power Clean Cleaner, 500 g
Chlorine-based bleach - from 15 to 30%, non-ionic surfactants - less than 5%.
How to use Mold remover Galax Das Power Clean Cleaner, 500 g
Spray evenly onto the moldy surface from a distance of 10-15 cm, avoiding excessive wetting of the surface. Leave for 15-20 minutes. Then rinse the treated area with water and wait for it to dry. Do not remove the mold before spraying to prevent the spread of dangerous spores. If the mold does not disappear the first time, the procedure must be repeated. If irritation occurs, stop using immediately, leave the room and wait for the product to dry.
No-delivery refund
