M4WD Thin 620 Bearing Fit 2mm Set 620 Shaft Bearing Mokedo-factory "Just Thick" 4-Piece

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. ✅The thin 620 bearing "Just Fit 2mm Thick" is a bearing that can be used as a shaft bearing for Mini 4WD cars. ✅While standard 620 bearings have a thickness of 2.5 mm, these bearings are 2 mm thick, making them 0.5 mm thinner. Using conventional 620 bearings as shaft bearings would cause them to protrude slightly from the chassis, requiring modifications such as replacing the shaft with a longer one (72 mm) and passing it through the wheel. (If using conventional 620 bearings, the 60 mm shaft included in the kit would be too short.) ✅It can be installed without any complicated modifications, so even beginners can use it with ease. ✅The plastic bearings included in the kit have high friction resistance, so we recommend replacing them with bearings when using high-power motors, etc. Also, plastic bearings can wear down and their inner diameter can increase, which may cause looseness in the shaft, so we recommend using bearings as a countermeasure. ✅Size: [Outer diameter] 6mm, [Inner diameter] 2mm, [Width] 2mm JAN: 4573425582193 *mokedo-factory is a registered trademark. ✅The thin 620 bearing "Just Fit 2mm Thick" is a bearing that can be used as a shaft bearing for Mini 4WD cars. ✅While a normal 620 bearing has a thickness of 2.5mm, this bearing has a thickness of 2mm, making it 0.5mm thinner.When using conventional 620 bearings as shaft bearings, they protrude slightly from the chassis, requiring modifications such as replacing the shaft with a longer one (72mm) and passing the wheel through. (If using conventional 620 bearings, the 60mm shaft included in the kit will not be long enough.) ✅It can be installed without any difficult modifications, so even beginners can use it with ease. ✅The plastic bearings included in the kit have high friction resistance, so we recommend replacing them with bearings when using high-power motors, etc. Also, plastic bearings may increase in inner diameter due to wear, which can cause looseness in the shaft, so we recommend using bearings as a countermeasure. ✅Size: [Outer diameter] 6mm, [Inner diameter] 2mm, [Width] 2mm JAN: 4573425582193 ※mokedo -factory is a registered trademark.