Inkbird Temperature Controller Temperature Digital Temperature Temperature Thermocontroller for 110V 10A Thermostat, Control, Heating/Cooling, 2-Stage

The thermostat is plug-and-play and easy to operate. Measurement and set temperatures can be displayed simultaneously. Dual-use temperature controller: Dual relay outputs can be used for heating or refrigeration mode Thermostat heater with high and low temperature alarm function: If the temperature exceeds the set range or if there is a problem with the sensor, a high or low temperature alarm will sound Thermocontroller maximum output: 1100W (110V) with temperature calibration function and delayed start protection. Use the up and down buttons to change the set temperature and other values, and the SET button (center button) to enter setting change mode, confirm setting changes, and move between setting items. Suitable for green thermo greenhouses, mushroom houses, incubation rooms, cultivation and planting tanks, home brewing, wine cellars, fermentation chambers, aquariums, pet breeding, incubation, reptile thermostats, bird and rabbit hutches. Cooling and heating control is possible over a wide range. Plug and Play Buzzer alarm: high and low temperature alarm Overheat and sensor failure alarms Environmental temperature: -30~75°C/-22~167°F Body dimensions: 140x68x33mm Dual display: Measurement and set temperatures can be displayed simultaneously. Temperature control range: -50~120°C / -58~248°F Temperature resolution: 0.1°C/0.1°F Temperature accuracy: ±1°C (-50~70°C)/±2°F (-58~160°F) Temperature control mode: On/off control, heating/cooling Input power: 100~240VAC, 50Hz/60Hz Temperature control output: Max. 10A, 100V~240V AC Relay contact capacity: Heating (10A, 100-240VAC) / Cooling (10A, 100-240VAC)