Line Level Attenuator Unit FX-AUDIO- AT-01J

In addition to the 3-stage gain setting, there is also a pass-through setting. Careful high-quality sound design Simple setup with no instructions required Robust and compact casing that does not get in the way This rare gem! A simple attenuator that is small and does not degrade sound quality. "I like the sound, but it has so much power that it's hard to use!" "When I turn down the volume late at night, I'm concerned about gang errors." "I want to reduce sound quality deterioration due to volume" In response to customer feedback, we have developed a simple attenuator that is small and has minimal deterioration in sound quality. This is a fixed attenuator that can be easily set using a DIP switch, with a focus on functionality and a compact housing that does not get in the way. Accuracy error: Gold skin resistance of less than ±1% minimizes sound quality deterioration. By connecting to the input side of a high-power amplifier such as the FX-1002J+ or FX502J-S, you can avoid volume positions that tend to cause gang errors even at low volumes. By connecting it to the input side of a pure power amplifier like the FX-501J/FX-1001J and omitting the preamplifier, you can enjoy the straight sound quality of the power amplifier alone. Multi-stage attenuators are extremely expensive devices, starting at tens of thousands of yen even if they are inexpensive, but by limiting the gain settings to 3 stages, we have achieved a very affordable price. PC audio has become commonplace, and the number of situations in which volume can be adjusted on the source side is increasing, so we have responded to the need for an attenuator with limited functionality and a low price. ▼▼Click here for the top model with even higher sound quality▼▼ https://www.amazon.co.jp/dp/B07Y1DZ79D?ref=myi_title_dp [Product features] ■In addition to the 3-stage gain setting, there is also a pass-through setting. The DIP switch on the main unit allows for 3-step gain adjustment (-6/-10/-20dB) as well as pass-through settings. By attenuating the input line level audio signal, it is possible to make adjustments such as changing the volume opening range of an amplifier connected to the rear stage of this unit, or to replace it with a preamplifier. ■Special high-quality sound design ・Adopts gold-plated resistor with accuracy error: ±1% or less ・High-quality gold-plated leg type is used for the DIP switch. ・High-quality gold-plated RCA terminals are used for input and output terminals. ■Simple setup with no instructions required The settings are printed on the main unit, so you can change them while checking them. Four settings (PASS/-6/-10/-20dB) support a wide range of situations. ■Small and robust housing that does not get in the way Although it has a small casing of 25 mm in height x 40 mm in width x 55 mm in depth (*excluding protrusions), the weight of 63 g makes it feel luxurious when held in your hand. In addition, the entire casing, including the front and rear panels, has been given a fine sandblast finish so that it plays a supporting role and does not stand out. [Notes] *Be sure to turn off the power to the device connected to the input/output terminals of this unit before setting the gain. *There is no instruction manual. Please refer to the setting table printed on the main unit and make the settings. Example) For -20dB setting: Turn on switches 1 and 2 and turn off switches 3 to 6. [Product specifications] Brand: FX-AUDIO- Product model number: AT-01J Color: black Product warranty period: 6 months from the date of purchase Input terminal: Stereo RCA terminal (gold plated) Output terminal: Stereo RCA terminal (gold plated) Function: Gain setting (attenuation) function PASS/-6/-10/-20dB 4-step switching Size: Height 25mm x Width 40mm x Depth 55mm (excluding protrusions) Weight: 63g