【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
Fastest tightening in Makita history and easy to use with dual springs. Customizable with app + adapter (sold separately). 4-stage hitting mode (fastest, strong, medium, weak). Each mode can be customized using the app. Suitable for everything from work that prioritizes power and speed to delicate tightening of small screws, etc. 4 LED lights. You can customize the light intensity and afterglow time with the app.
Easy to use 6 modes to assist with a wide range of tasks. Set the best mode for wood, texture, and bolts. Each mode can be customized with the app. Up to 10 customized settings can be registered. There are 5 initial presets that you can try right away. Ready to use with no configuration required. 4 LED lights. It's bright even when corner drilling, and work efficiency has been improved by reviewing the light placement. Set the forward/reverse lever to neutral and pull the trigger to enter "light mode", which can also be used as simple lighting.
DC 36V (40Vmax), sliding Li-ion battery specifications. Comes with battery and charger. Tightening capacity: Machine screws M4 to M8/Ordinary bolts M5 to M16/High strength bolts M5 to M14/Coarse thread 22 to 125mm. Maximum tightening torque: 220N・m. Rotation speed: [rotations/min]: Fastest mode 0-3,700/Strong mode 0-3,200/Medium mode 0-2,100/Weak mode 0-1,100/Wood mode 0-1,800/Volt 1 mode 0 to 2,700/Volt 2 mode 0 to 3,700/Volt 3 mode 0 to 3,700/Tex (thin plate) mode 0 to 2,900/Tex (thick plate) mode 0 to 3,700
Number of blows: [times/min]: Fastest mode 0 to 4,600/Strong mode 0 to 3,600/Medium mode 0 to 2,600/Weak mode 0 to 1,400/Wood mode 0 to 4,600/Volt 1 mode stops immediately after hitting starts/Bolt 2 mode 0 to 4,600/Volt 3 mode 0 to 4,600/Te Thin plate mode Stops immediately after hitting starts / Thick plate mode 0 to 2,600. Work volume per charge (estimate): Approximately 800 wood screws φ4.3 x 65 mm, approx. 460 pieces φ5.4 x 90 mm / Approximately 150 hardware screws φ6 x 120 mm / Approximately 4,100 machine screws M8 x 16 mm
Body length: length 119mm x width 86mm x height 247mm. Mass: 1.6kg (when BL4025 is installed)
