LED Sink Light, 15W, Daylight, Sensor Switch, Wiring Required, LT-NKL10D-HCS 06-4028

[Features] ● Sensor switch type LED sink light that provides ample light for your hands ● Switch on/off by simply bringing your hand close, even with wet hands ● Wiring work required *Please be sure to ask a construction company or electrical shop (qualified electrician) to install the fixture ● Can be installed under a shelf or on a wall ● Long-life, energy-saving lighting fixture ● Service outlet included (up to 1000W, not linked to the power switch) [Specifications] ■ Rated voltage: 100V 50/60Hz ■ Rated power consumption: 9.9W ■ Light source color: Daylight ■ Total luminous flux: 850 lm ■ Specific energy consumption efficiency: 85.8 lm/W ■ External dimensions: (approx.) W465 x H48 x D88mm (main unit only) ■ Main unit weight: Approx. 565g ■ Accessories: Fixing screws (30mm x 2, 15mm x 2), instruction manual with warranty *LED cannot be replaced *For indoor use only <Caution> *Please install the fixture carefully according to the instructions. Improper installation may result in fire, electric shock, or injury due to falling. *When installing in a recessed box, use a metal one. If the box is made of resin, the heat from the fixture will accelerate deterioration of the resin, which may result in fire or injury due to falling. *Do not insert metal objects into gaps or heat dissipation holes in the fixture, as this may result in electric shock or malfunction. *Do not cover the fixture or lamp with cloth or paper, as this may result in a fire. *Do not use an outlet with a capacity exceeding 1000W, as this may result in a fire. *Do not modify, disassemble, or replace parts of the fixture, as this may result in fire, electric shock, or injury from falling. *Do not touch the power outlet with wet hands, as this may result in electric shock. *If you notice any abnormality, immediately turn off the power. Leaving the power unattended may result in a fire or injury due to the unit falling. Consult your retailer or customer service center. *Make sure to insert the power cord securely all the way into the socket hole on the connection terminal block. If the power cord is not inserted completely, it may result in a fire or electric shock.